1 / 1
Print-in-Place Concentric Fidget Rings (V-Track / No Supports) — image 1

Print-in-Place Concentric Fidget Rings (V-Track / No Supports)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A highly satisfying, smooth-spinning concentric fidget toy!

Rating
5 / 5
Likes
2
Downloads
20
Makes
1
Views
109
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A highly satisfying, smooth-spinning concentric fidget toy! This model features 4 independent rings that spin freely within each other, but will never fall apart thanks to a hidden, interlocking V-track design inside the walls.

It is designed to be 100% Print-in-Place with a perfectly calculated 0.40mm tolerance. Just print it, take it off the build plate, give the rings a firm twist to snap them free, and spin away!

This model looks absolutely incredible when printed in dual-color (co-extruded) or silk PLA, as the spinning rings create a mesmerizing color-shifting effect.

How to free the rings: When the print is finished, the rings might be slightly stuck together due to minor stringing or tiny imperfections. Simply hold the center ring with your thumb and index finger, and gently but firmly twist the outer rings until you hear a satisfying "snap". Work your way outwards ring by ring. Once broken free, they will spin smoothly forever.

Link if video is not showing: https://youtube.com/shorts/2Ii0MzaaIFE?feature=share

Crucial Print Settings (For a perfect spin):

  • Layer Height: 0.20mm (Do not use 0.15mm or lower, as the 0.20mm height is mathematically optimal for the V-track clearances).

  • Seam Position: Random. (This is a pro-tip! If the seams align on all rings, they might rub against each other and lock up. Random seams ensure a buttery smooth spin).

  • Elephant Foot Compensation: Make sure this is turned ON in your slicer (default in PrusaSlicer is 0.2mm). If the first layer squishes too much, the rings will fuse at the bottom.

  • Infill: 15% Gyroid.

  • Perimeters/Walls: 2 or 3.

  • Supports: None!

I would love to see what filament combinations you use! Please post a Make and leave a rating if you enjoyed the design. Happy printing!

Tags