TOTK Ganon Gloom Spear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cosplaymodel of the Ganon Gloom Spear
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 20
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
This is a model of the Ganon Gloom spear as seen in TOTK.
its made to be printed in 100% scale (You probably need to cut it to size to fit your printbed),
the wooden dowel is 27mm in diameter and 1,53m long.
i used the "Upper handle" 2 times, once for the headpiece and once for the cap at the end to make it more interesting.
I Printed in PLA with atleast 3 walls for better welding, also for those who want to build this like i did here are some procesing tips:
Sand the blade beforehand, then apply bondo or putty (yes this holds very well) then sand again, the smaller edges or details can be made smooth with sprayon bondo/Putty (buy this in automotive stores), then guess what.... Sand again.
The beads fot the feather can be any tipe mine are spikey (Also 3d printed)
For the texture in the blade i dabbed some "structual marmor paste" on there with a brush.
If you have questions just ask, ill do my best to answer those :)