Curtain weight / stretcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist replacement for weights on my living room curtains.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very simple design and was copied/adapted from the original parts that were on my living room curtains (thin ones). One day, we removed the curtains to wash and found that the parts were all broken, probably due to poor resistance to UV light. So, I made a quick design to replace them.
I was not planning to publish/share this, as I consider it too simple. I changed my mind when I could not find anything similar or to the same propose. My curtains are 80-ish cm wide, so the plate contains 7x 10cm tubular modules and 6x interconnection part. This can be easily changed. Also provide STEP files to facilitate modifications.
I used white PLA to be discreet. Print settings: Nozzle 0.4mm Layer height 0.25mm supports yes (for the interconnection parts) Brim auto
Category: Replacement Parts