Alfawise WIN660 Wall Mount v2 – Quarter-Turn Holder, Tapered Rails, PETG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stronger v2 of the quarter-turn wall holder for the Alfawise WIN660 window robot. Tapered rails, prints flat.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 1
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
A wall holder for the Alfawise WIN660 window-cleaning robot. Slide the handle in and give it a quarter turn: it locks behind the top rail and the bottom lip. Version 2 keeps the exact same inside, so it works like the original, but the rails are redesigned after the first version kept breaking.
What changed in v2
Each rail tapers in an arc, from 9 mm at its root, where it carries the load, to 5.5 mm at its free end
2 mm fillets where the rails meet their posts
6 mm wall plate (was 5)
Smaller screw holes: Ø 6.5 mm with a 90° countersink, still 40 mm apart, so the old wall plugs line up
Files now come in print orientation: wall plate flat on the bed
Why v1 broke
The rails are held on one side only, so the robot's weight bends them right at their root
In v1 that root was 5 mm thick and printed with the layers across the bend
In a finite-element check with the same load (40 N pulling each rail), peak stress drops from 20.5 MPa in v1 to 7.6 MPa in v2
Features
80 × 80 mm wall plate, 40 mm deep overall
25 mm gap and 35 mm opening, same as v1
"WIN660" engraved on the top rail
Three-colour version for INDX or MMU: white plate, black rails, red lettering
STEP files included
Print settings
PETG, 0.2 mm layers, 5 walls, 40 % gyroid infill
Wall plate flat on the bed, as exported
Supports under the two rails (from the plate)
Three-colour file: assign one filament to each part
What you need
Two countersunk screws, Ø 5–6 mm, and wall plugs that suit your wall
En français
Support mural pour le robot laveur de vitres Alfawise WIN660 : la poignée s'engage puis se verrouille d'un quart de tour derrière le rail haut et la lèvre basse. La v2 garde exactement le même intérieur, mais les rails sont redessinés : ils s'effilent en arc de 9 mm à la racine, là où ils travaillent, à 5,5 mm au bout libre, avec des congés de 2 mm et une plaque de 6 mm. Calcul aux éléments finis, même charge : 20,5 MPa en v1, 7,6 MPa en v2. Trous Ø 6,5 fraisés, entraxe 40 mm inchangé. Fichiers en position d'impression (plaque sur le plateau), en PETG, 5 périmètres, 40 % de remplissage, supports sous les rails. Version trois couleurs pour INDX ou MMU : plaque blanche, rails noirs, lettres rouges.
Designed with AI assistance (parametric Python script, FieldCraft analysis).