Rc Piper cub plane laser cutting templates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
micro park flyer rc piper cub with laser cutting files, it flies slowly and steadily, 3 channel, excellent for beginners
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 37
- Makes
- 0
- Views
- 526
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
1104 4000kv brushless motor with 5040 prop,
2 gram servos x 2 pieces , FS2A micro receiver, 3.7v 1000mah lipo - two 500mah batteries in parallel, and 10A micro esc, 1mm carbon fibre rod.
AUW : 54 grams
Wingspan: 56cm
length: 35cm
i used 3mm depron and laser cut the template and built it. use carbon fibre rod for control horns and also on top of the wing for strength.
cut a slit on the top of wing and bent slightly and add the carbon fibre rod using glue, then at the centre of the wing, cut the carbon rods on both sides to create a dihedral and glue the dihedral holder at the center to maintain the shape.
if you have any doubts on the build, you can contact me on instagram @easy__3d