PC Master Race Guy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PC-Master-Race-Guy (PCMR-Guy) designed to be placed inside a gaming rig.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Public Domain
Designed the PC-Master-Race-Guy (PCMR-Guy) from various images I found online.
The model with "Filament arms" can be printed at 100 % scale to use a 1.75 mm filament for the arms.
This was the initial idea because the PCMR-Guy is displayed without arms most of the time.
The total model size at a 100 % scale is about 10.5 cm (or roughly 4" in retarded units).
However, for those of you who would like to increase the size of the final figure, I tried to model muscular arms with massive "additional" shoulders.
The model was printed on a Prusa MK3S with 0.1 mm layer height. PLA was used with temperature settings at 200 °C using brim and support.
To lower the center of gravity, I used 40-60 % infill for the lower parts like the "Boots" and the "Body". For the "Hair" I used 8 % infill so the figure won't tilt over easily.
The "Boots" have been modified so that tiny magnets (diameter 6mm, height 3 mm) will fit in. Now the PCMR-Guy will stand steady inside my case.
Feel free to improve the design and print parameters