ormerod 2 z axis drag chain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To avoid the unsightly mess of cables dangling around like behind your computer (yes yours) i have made two "end…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
To avoid the unsightly mess of cables dangling around like behind your computer (yes yours) i have made two "end points" for the cables feeding up onto the x axis.
Bill of Materials:
"X axis stepper motor"
3 M3 x 35mm cap
10 x 15mm drag chain
Print Settings
Printer:
Ormerod 2 528.4
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
n/a
Notes:
The fastening points should be printed vertical with support, the rest need only proper cooling.
I chose to use hot glue to fasten the end points to the mainboard part.
Fastening point 1 should be installed on the mainboard part furthest away from the chain link. The metal shroud must either be removed completely or have the wall with the wires through, removed.
Category: 3D Printer Parts