1 / 1
PSU Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PSU COVER 3D PRINTER Shamelessly cloned from Tevo Tarantula PSU Cover, but made from scratch. 3D files attached, if…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 58
- Makes
- 0
- Views
- 835
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
PSU COVER 3D PRINTER
Shamelessly cloned from Tevo Tarantula PSU Cover, but made from scratch. 3D files attached, if someone wants to remix again.
NEEDED PARTS
INSTRUCTIONS
- The 3 pin plug needs two M4 screws of at least 6-8 mm long and 2 nuts.
- The slot for the TX60 connectors is tight enough to hold them in place but just in case I superglued them to the walls.
- To hold the cover in place screw 3x M4 screws through the hole on the left/right sides to the hole on the PSU.
Print Settings
Printer:
JGAurora A5s
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament:
Geetech PLA
Yellow
Category: Electronics