The Argonath Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Argonath Hueforge 200x160mm, four colours.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
A nice hueforge about the Pillars of the Kings, I'm just expanding my Lord of the Rings collection.
Printing description:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x160.42mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#0a5780 PLA BambuLab Basic Cyian Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Jade White
At layer #23 (1.92mm) swap to Basic Cyian for the rest.
Happy printing! Leave a comment if you like it, and share your make.