Sapphire-S belt aligner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
By using these parts in combination with F624-ZZ bearings you can align your belts properly.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 16
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
By using these parts in combination with F624-ZZ bearings you can align your belts properly.
Credit goes to jltantrum for coming up with the idea and initial design.
Post-Printing
Assembly
Put captive M3/M4 nuts in place. Make sure to press nuts all the way into the part, otherwise the original screws won't be long enough.
Use original screws to screw plate to motor, use M3x10mm to screw motor with plate to printer base
Use M4x5mm to screw upper part to top plate, use original screws to screw bearing to upper part.
Category: 3D Printer Parts