IKEA 365+ 10,2 Liter Filamentroller 2026 und Trockenbox (Drybox) - (D/UK/F/CZ/ESP)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimierung des schon vorhandenen Filamentrollers
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 2
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Diese neue Version 2026 habe ich im Laufe der letzten Jahre weiter verfeinert und optimiert.
Hier stelle ich nun euch die neuste Version vor, um einen besseren Gebrauch zu erreichen.
Die Prusament 2 kg Welle kann auch für breitere Filamentrollen verwendet werden. Durch die Kugellager rollt diese extrem gut ab, ab und zu auch zu gut. ;o)
Für die Verwendung von BambuLab Filament, habe ich auch hierfür eine Welle konzipiert. Diese passt auch für Unger Filament https://filament-unger.de/
Es sind vier Bohr-Schablonen dabei.
1. Zwei für die beiden Rollenhalter rechts und links
2. Für den unteren mittleren Rollenhalter
3. Für die beiden Filament-Durchführungen und das Hygrometer
Wie immer, bitte selbst testen und dann bitte auch Feedback geben und bewerten.
Verbesserung ist, dass die Rollen nicht mehr unten in der Welle verklemmen können.
Besten Dank – euer Sven Brehm
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
Over the past few years, I've refined and optimized this new version, 2026.
Here I present the latest version to you, designed for improved usability.
The Prusament 2 kg shaft can also be used for wider filament spools. Thanks to the ball bearings, it rolls extremely smoothly—sometimes a little too smoothly. ;o)
I've also designed a shaft specifically for BambuLab filament. This also fits Unger Filament
Four drilling templates are included:
1. Two for the two spool holders on the right and left
2. For the lower center spool holder
3. For the two filament guides and the hygrometer
As always, please test it yourself and then provide feedback and a rating.
The improvement is that the spools can no longer get stuck at the bottom of the shaft.
Thank you—Sven Brehm
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
Au cours des dernières années, j'ai perfectionné et optimisé cette nouvelle version, la 2026.
Je vous présente ici la toute dernière version, conçue pour une utilisation encore plus intuitive.
L'axe Prusament 2 kg est également compatible avec les bobines de filament plus larges. Grâce à ses roulements à billes, il tourne avec une fluidité exceptionnelle, parfois même un peu trop ! ;o)
J'ai également conçu un axe spécialement pour le filament BambuLab. Cela convient également à Unger Filament
Quatre gabarits de perçage sont inclus :
1. Deux pour les supports de bobines latéraux (droit et gauche)
2. Pour le support de bobine central inférieur
3. Pour les deux guides-fils et l'hygromètre
Comme toujours, n'hésitez pas à tester le produit et à me faire part de vos commentaires et de votre avis.
L'amélioration majeure réside dans le fait que les bobines ne se bloquent plus au bas de l'axe.
Merci ! — Sven Brehm
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
Během posledních několika let jsem tuto novou verzi, 2026, vylepšil a optimalizoval.
Zde vám představuji nejnovější verzi, navrženou pro lepší použitelnost.
Tác Prusament 2 kg lze použít i pro širší cívky s filamentem. Díky kuličkovým ložiskům se otáčí extrémně hladce – někdy až příliš hladce. ;o)
Také jsem navrhl tác speciálně pro filament BambuLab. Toto se hodí i pro Unger Filament
Součástí balení jsou čtyři vrtací šablony:
1. Dvě pro dva držáky cívek vpravo a vlevo
2. Pro spodní střední držák cívky
3. Pro dva vodítka filamentu a vlhkoměr
Jako vždy si prosím sami vyzkoušejte a poté poskytněte zpětnou vazbu a hodnocení.
Vylepšení spočívá v tom, že cívky se již nemohou zaseknout na spodní straně táhla.
Děkuji – Sven Brehm
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
En los últimos años, he perfeccionado y optimizado esta nueva versión, la 2026.
Aquí les presento la última versión, diseñada para una mayor facilidad de uso.
El eje Prusament de 2 kg también se puede usar con bobinas de filamento más anchas. Gracias a los rodamientos de bolas, gira con extrema suavidad, ¡a veces incluso demasiado! ;o)
También he diseñado un eje específico para filamento BambuLab. Esto también sirve para el filamento Unger.
Se incluyen cuatro plantillas de perforación:
1. Dos para los dos soportes de bobina (derecho e izquierdo).
2. Para el soporte de bobina central inferior.
3. Para las dos guías de filamento y el higrómetro.
Como siempre, les invito a probarlo y luego compartir sus comentarios y una valoración.
La mejora consiste en que las bobinas ya no se atascan en la parte inferior del eje.
Gracias, Sven Brehm.