MOD: only 4 nuts & bolts and 2kg support / Jen 4 šroubky s matkou a podpora 2kg cívky
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: c_rings_0.25mm_PLA_MINI_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
* Range extended by 50 mm * Instead of 8 pairs of nut and bolt you would need only 4 * Rozsah zvětšen o 50 mm * Namíst
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 63
- Makes
- 2
- Views
- 727
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Nothing else changed - see short description, I have added also original version of left_frame_flex.stl with single bolt/nut per bearing. For 2kg support print left_frame_flex2.stl !
Nic víc se nezměnilo - koukni na krátký popis. Přidávám i původní verzi left_frame_flex.stl upravenou jen pro jeden šroub/matka na ložisko. Pro podporu 2kg tiskni left_frame_flex2.stl
