1 / 4
SF-001 HEPA Spacer and SF-002 Double Thickness Remodel — image 1
1 / 4

SF-001 HEPA Spacer and SF-002 Double Thickness Remodel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple spacer, doubling the thickness to allow use of a 120mm HEPA & Activated Charcoal filter

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
26
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Like many people, I don't solder that often so I don't have a dedicated space set-up for it. I liked the look and concept of the SF-001 but wanted to add a true H13 HEPA filter and carbon sheet to make sure what little soldering I do doesn't cause me issues. Hence, this spacer adds an extra gridfinity's width to this extractor to enable the use of a 120x120mm HEPA Fitler + Carbon filter combo

There's 2 options availble: a spacer for anyone whose already printed the SF-001 and doesn't want to waste the material and a full remodel that significantly reduces the print time and doesn't require the spacer. Both will require the original back piece. I'd also recommmend using some electrical tape to secure the filters to the fan and seal up any gaps. Make sure to download the back piece from the original too

Please feel free to modify the parts as you see fit: STEP files are included! The square mesh does look worse and I've neglected to add the detail/colour strip from the original model in the name of print speed

Parts Used:

  • Noctua NF-P12 redux-1700 PWM, High Performance Cooling Fan, 4-Pin, 1700 RPM (120mm, Grey)

  • Akasa 5V to 12V DC Step-Up Voltage Converter Cable for USB Type-A to 3-Pin & 4-Pin PC Fan, 0.6M, Up to 12V / 0.7A Output, AK-CBFA10-60BK

  • Custom Filter H13 Replacement HEPA Filter 120*120*27mm / Activated Carbon Filter 120*120*10mm Housing Clean Air Home (HEPA Filter + Carbon Filter Combo)

  • 2 Extra M2 Inserts and M2 Screws (Compared to the SF-001, only if using the spacer)

Tags