1 / 6

Hoop Earrings (Parametric)

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A pair of lightweight, elegant and fully customizable hoop earrings.

Updated at source: Apr 6, 2026

Model information

A pair of lightweight, elegant and fully customizable hoop earrings.

This model is fully parametric, allowing you to easily adjust:

Designed specifically for 3D printing, with no excessive overhangs (maximum 45° on both the hoop and the attachment).

You will need:

Each earring has a small attachment hole at the top.

Simply use a jump ring to connect the hoop to the earring hook.

Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize it.

Parameter	Default Value	Description
diameter	40 mm	Hoop diameter
thickness	2 mm	Hoop thickness
attachment_hole	2 mm	Diameter of the top attachment hole
attachment_thickness	2 mm	Thickness of the top attachment
attachment_chamfer	attachment_thickness / 6	Chamfer applied to the attachment

This model is made for FDM 3D printing, avoiding any excessive overhangs.

Hoops are round, with a profile starting at 45° to prevent firsts layers deformation
Attachments use 45° chamfers.

Use a 0.2 mm or 0.4 mm nozzle
Enabling the Arachne wall generator helps for the attachement hole.
Print on a smooth build plate (smooth PEI or similar).
When printing with silk filament, use the silk print profile for a glossier finishes or follow the printing with silk filaments recommandations:
- Outer wall speed is reduced to 40mm/s.
- Normal printing acceleration is reduced to 5000 mm/s.
- Outer wall acceleration is reduced to 3000 mm/s.
If you experience adhesion issues, make sure your build plate is thoroughly cleaned.