1 / 2
Binary Coaster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick and simple coaster with binary in it.
Dimensions:
4 inch diameter (10.16 cm)
.25 inch thickness (0.635 cm)
.125 inch depth (0.3175 cm)
Print settings:
The back is blank, so print with that face facing build plate.
No supports
25% infill (feel free to chose your own)
Any layer height, but I'd recommend .2 mm.
Use whatever speed you normally use. (I normally use 55 mm/s)
Feel free to change any settings for any reason.
The attached pre-sliced file is sliced with .2 layer height, .4 nozzle, 55mm/s speed 20% infill, infill pattern “triangles” and bed temp of 65C and nozzle of 200C. (Sliced for ender 3 with CR touch w/ cura)