Microscope Ocular Lens Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement of broken plastic part of the microscope - ocular lens adapter
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is an emergency fix; this part is not supposed to replace correct original manufacturer's part.
Manufacturing instructions
Material: ASA
3D Printer: Any FDM 3D printer capable printing ASA
Slicer settings: no supports
Post processing instructions: Clean the parts from stringing if needed
Assembling instructions
Use the original bolts to fix the replacement part.
Screw the ocular lens on the 3D printed part.
QC procedures
Visual inspection:
Ensure that the surface is smooth and the internal thread without artifacts.
Check if the flat part is not bent or warped.
Tolerance inspection:
The ocular lens should be inserted and rotated smoothly.