Paint holders for HARVMATTA/KVISSLE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paint holders for 30mm (Pro Acryl) and 25mm (AK, AP, Vallejo) bottles for HARVMATTA/KVISSLE.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Paint holders for some common acrylic tabletop model paints. All designed to use a whole insert of a HARVMATTA/KVISSLE.
For Pro Acryl / Monument Hobbies: A 9 by 8 grid which fits up to 72 paints bottles per insert. Hole diameter is about 30.2mm. This is more than enough space to store the whole Pro Acryl range inside a single HARVMATTA/KVISSLE. This print has two model files - one for the sides, one for the center.
For Vallejo, Army Painter and AK: A 9 by 12 grid which fits up to 108 paint bottles per insert. Hole diameter is about 25mm each. This will also fit TTC paints, but they are pretty loose here, and might fall over when you slide the insert in or out. There is only one model file, it has to be printed 3 times for a single insert.
I highly recommend getting some extra rails for the inserts, with the default rails only 2 inserts will fit inside due to the bottle height. I use these ones here: https://makerworld.com/en/models/512636-upgrade-kit-for-ikea-harvmatta-kvissle
I also recommend not putting any bottle in the back row, it is a bit hard to get them out without dropping the insert.
The print comes with holes for magnets (up to 8mm in diameter are supported), just drop them in the holes if you want to mount the holder on the metal side. I personally opted to just glue them down on the cork side of the inserts. Technically there is no glue necessary on the cork side. With some paints inside, it holds pretty well on it's own.