1 / 2
Upgrade to Laser Trainer for Dryfire Practice
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replaces two centering screws of the Laser Trainer with spring plungers to aid in adjusting the laser.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
In addition to the printed parts identified, this model now requires two steel "pen springs" to push against the plungers. The springs are of 0.5 mm diameter wire, with a spring diameter of 6mm and length of 40mm with 20 turns over the length (can be found at AliExpress). These were a few springs I had in my workshop and seemed to work OK. Other spring sizes may work but the diameter of the plunger and interior of the cylinders may have to change with the spring used.