Chico Bravo Stroller Light Mount / Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket designed to attach some 200-lumen flashlights I picked up at Costco in a three pack for $15 some…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a bracket designed to attach some 200-lumen flashlights I picked up at Costco in a three pack for $15 some time ago. Any flashlight with a diameter of ~28mm (1 1/8") should work fine.
The rectangular slots on the sides are for two zip ties to hold the bracket on to the stroller (I recommend attaching it to the front KeyFit bar) and two more zip ties to hold the flashlights in place.
I modeled this in Fusion 360 and you can find the source file at http://a360.co/2jafy3i.
Print Settings
Printer:
Maker's Tool Works MiniMax
Rafts:
No
Supports:
No
Resolution:
0.3mm / layer
Infill:
10%
Notes:
I printed this in Solutech 3D white PLA at 230C with 2 perimeters / shells. It took about 2.5 hours. Bed was treated with Garnier Fructis Style Full Control (Hold 4).
Poorly, and with four attempts.
Category: Other