Outdoor sofa/couch clip
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.24 – €1.51 net (excluding VAT)
For file: Outdoorsofaclip_0.4n_0.3mm_PLA_Prusa CORE One_1h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A clip for joining certain modular outdoor sofa pieces together.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Make sure that your couch looks roughly the same on the underside. About 62x39x40 mm on the outside and the inside smaller diameter is about 29 mm. About 5 mm thick. The clip can be hard to bend but it should be that way.
Can be printed in PLA or PETG if you are paranoid of UV degradation. 0.3 mm layer height and 60% infill for example gyroid.