Wallplate for 3 Keystones (remastered)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small, wallplate-mounted module with space for 3 keystones.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 1
- Views
- 92
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a keystone box for 3 keystones that can be mounted in any of the four sides. After being asked by KCx3DP to modify the original so that they could mount the keystones on the side, I realized it was easier to just make a different version that incorporated some things I've learned in the past couple of years.
So this is a much simpler geometry, with tabs securing everything, making everything a little bit more solid and yet easier to put together and disassemble.
I printed it in Prusament PLA with the 0.2mm Balanced mode in PrusaSlicer to great success and with no need for filaments, just some stick glue on the bed to improve adhesion.