1 / 1
Downy Unstoppables Laundry Scent Booster Dispenser — image 1

Downy Unstoppables Laundry Scent Booster Dispenser

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dispenses a set volume of the Downy Unstoppables scent booster pellets into a scoop - only 55g!

Rating
0 / 5
Likes
8
Downloads
17
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Been to Costco and bought a big bottle of Downy Unstoppables and found yourself struggling to tip out a small amount of pellets from the large bottle? No more! Introducing the Downy Unstoppables pellet dispenser!

Prints without supports, requires some glue to ensure it doesn't come apart sending pellets all over your laundry floor.

Tested print settings: PLA+, 2 walls, 10% gyroid infill, brim on main body. Should only require approx. 55g of filament.

Assembly as follows:

  • Place some glue into the end of the shaft of the part named "bottom swivel"

  • Insert the bottom swivel into the main body and then insert the top swivel piece into the other side of the main body to click the two swivel pieces into place

  • Rotate the two swivel pieces such that when the top swivel holes align with the main body holes, the bottom swivel holes completely block the main body holes (the swivel pieces click together mechanically such that they should resist some twisting force when in the correct position)

  • Add glue to the ridge of the screw interface and fit it to the main body ensuring that the slot for the swivel handle is aligned such that moving the handle back and forth in the slot allows the swivel holes to open and close from one end to the other end of the slot

Tags