1 / 5
Ubiquiti USW-Flex-2.5G 10-inch Rack Mount - Faster Print & No Supports — image 1
1 / 5

Ubiquiti USW-Flex-2.5G 10-inch Rack Mount - Faster Print & No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

10" Mini Rack mount for a Ubiquiti 2.5G Flex Mini Switch.

Rating
0 / 5
Likes
10
Downloads
56
Makes
1
Views
321
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Mod10 Rack Mount for Ubiquiti USW-Flex-Mini 2.5Gbe


This is a 10-inch rack mount for the Ubiquiti UniFi USW-Flex-Mini-2.5G-5, designed for use in the Mod10 mini server rack (or any standard 10-inch rack).

This is a remix of @mauker's design. I reduced material usage, opened up the center for better ventilation and faster print times, and altered the retention mechanism.

Important Note on Tolerances:

This is a tight tolerance design. Your printer needs to be producing accurate extrusion widths and your material shrinkage needs to be dialed in. If your machine is over-extruding or your filament shrinks more than expected, the switch may not fit. Tune your printer first!

Printing & Installation:

  1. Print the mount.

  2. Slide the Flex Mini in from the front. The rubber feet will compress slightly as you push past the retention lip.

  3. Once past the lip, the switch seats securely.

  4. Mount into your rack using standard cage nuts or M6 nuts (with Mod10 adapter inserts).

Hardware Required:

(Affiliate Links)

Files Included:

  • USW-Flex-Mini-2.5g Rack Mount STL

  • CAD (Fusion - F3D)

  • CAD (STEP)

Recommended Print Settings:

  • 0.2 mm layer height

  • 4 perimeters

  • 30%+ infill

  • NO Supports Required

  • PETG or Higher-Temperature materials recommended

Support My Work:

If you find this useful, please consider supporting my work: http://www.MandicReally.com/links


Buy Mod10 to mount your hardware in:

Tags