Milwaukee M12 & M18 Combo Charger mount.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EDIT 1/31/2021: After having an interaction with the original designer, I opted to remove my modified hooks with built…
- Rating
- 3.667 / 5
- Likes
- 92
- Downloads
- 627
- Makes
- 3
- Views
- 5,931
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
EDIT 1/31/2021: After having an interaction with the original designer, I opted to remove my modified hooks with built in pegs and went with SVideo's original design and stuck with his logic in having separate parts to facilitate proper bed orientation when printing the load bearing parts. I was just lazy and didn't want more post processing on my part.
I needed a Wall Control compatible mount for my Milwaukee M18 & M12 combo charger so I used SVideo's M12 charger and TinkerCAD to remix it.
I added a fast printing STL that will help check the dimensional accuracy of your printer that slots into the mounting slots for the charger. My first print was 100% spot on.
PARTS LIST:
1x M12_&_M18_Charger_Mount
1x 2x0_Flat_Right
1x 2x0_Flat_Left
4x 4x108mm_Pin
This is a remix from SVideo's DDD Printable Wall Control System 4x3_Milwaukee_M12_Charger https://www.thingiverse.com/thing:398515
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.28mm
Infill:
30%
Filament: Hatchbox PLA Grey
Notes:
Like SVideo says in the DDD project page, I used 4 wall perimeters to help with strength on the mounting tabs that slot in to the charger.
Category: Tool Holders & Boxes