(Parametric) Plant Tray / Saucer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Plant Tray (or Saucer): Diameter, Groove count, Height, Wall Angle and more.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Intro
Ever wanted a Plant tray / Saucer to fit your planter, but couldn't find one? (You don't need to answer that, as you're already here)
Well, look no further! 'Cause this saucer will scare your pants off! (not really, but do I have your attention?)
This model was created exactly due to not having the right tray for the plan pots we had lying around. So, fired up (Autodesk) Fusion (360) and managed to conjure up this thing.
Parameter list
Name | Unit | Expression | Comments |
Base_Diameter | mm | 150 mm | Base minimum diameter. |
Base_thickness | mm | 2 mm | Thickness without "Grooves" |
Groove_count |
| 3 | Same as name :) |
Groove_Length | mm | 40 mm | Same as name :) |
Groove_width | mm | 8 mm | Same as name :) |
|
|
| Ignore, but don't change |
|
|
| Ignore, but don't change |
Tray_Height | mm | 19 mm | How high you need the tray wall |
|
|
| Ignore - Used in suppressed feature |
Wall_Angle | deg | 26 deg | Wall Angle |
Wall_thickness | mm | 3 mm | Wall Thickness |
Parts List
A single print. No assembly required.
Files:
File Name | Comment |
|---|---|
plant Tray_Parametric.f3d | Fusion 360 file with customizable Parameters |
plant Tray_150.2.3.40.8.19.26.3.stl | STL with the standard parameters (see above) |
NOTE: in case additional sizes are needed and you don't have Fusion, I'll be happy to upload an STL with other dimensions.
Filaments:
PLA, PETG
anything that is plant-friendly and can hold water.
Printed Parts:
Special Print Instructions:
0.2mm Layer Height
Minimum 2 perimeters
Non-Printed Parts:
N/A