fgc mkII upper with glock barrel adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I took the Barrel Adapter pieces from Louisthebeast glock adapter file and added them into the original upper and…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 118
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
I took the Barrel Adapter pieces from Louisthebeast glock adapter file and added them into the original upper and barrel retainer housing, making it a few less pieces and more durable as two pieces rather then 4. I added a little more thickness to the retainer inset piece as well as length giving a little more support for the barrel length wise. I also notched the back of the retainer were barrel sticks into chamber to keep from having to cut material out manually for barrel. Everything should be a nice snug fit. Minimum sanding or prep needed.
The first Barrel adapter I added a picatinny to the bottom side of it for flashlight and other accessories.
added a notched upper receiver if you choose to print his adapters, still saving from having to manually notch chamber wall.
Feedback is appreciated.
Print Settings
Supports:
Yes
Resolution:
1.6
Infill:
99-100%
Filament:
doesnt matter pla +
Notes:
The upper takes a little more filament for the supports, use tree supports if possible.
Category: Sport & Outdoors