K2 Plus Cartographer V4 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mount heat insert part was modified to support Cartographer V4 more nicely.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 55
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings:
Same as Original.
Better to print in ABS / ASA.
Changes needed in the k2-improvements configs:
Edit cartographer.cfg file:
[cartographer]
mcu: cartographer
x_offset: 0
y_offset: -30
And:
[bed_mesh]
zero_reference_position: 175, 175
speed: 200
mesh_min: 10, 5
mesh_max: 340, 315
probe_count: 31, 31
mesh_pps: 0, 0
adaptive_margin: 10
fade_start: 5.0
fade_end: 50.0
bicubic_tension: 0.2
algorithm: bicubic
horizontal_move_z: 3
split_delta_z: 0.01
move_check_distance: 3
The mount need same screws as the original Model (PT M2.6 x 20 - Screws for plastic).