Yamaha Bolt/SCR Forward air filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
air filter compatible with the yamaha bolt/SCR that replaces the stock filter with a harley HD-0800 29442-99e air filter
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This air filter uses air filters for the harely davidson motorcycles part number HD-0800 29442-99e i can typically get one off amazon for less than $20. it adjusts the placement of the airfilter forward away from the riders knee and also allows for slightly more airflow than the stock (untested) but this filter has more surface area so its safe to assume. easy to service the filters can slip on and off with their rubber base. ive been running this for the better part of a year with 0 issues,
The gaskets and the cover plate are designed to be printed in tpu i would highly reccomend not skipping these as the stock gaskets are very hard to remove and the new air filter exposed plate is kinda ugly
Id reccomend printing the main air intake adapter body in something like ASA. PETG, Nylon, PC or any other higher temp resistant filament of your preferance, there is not a lot of shock to this component mainly elemental issues. i have run successfuly petg,PC and nylon without issues. i also ran PLA for about 4 months with no visible issues but this bike gets hot during the summer so i wouldnt suggest that for long term use.
no support needed print orientation should be obvious
Please print with 4 walls minimum and 15%+ infill, the more rigid the better and some of these components see some weird torsion like the crank case breather tube port it is hard to get the hose and clip on so that part needs to be strong
Ride safe and recklessly :)