The Pumpkin King's Bowtie
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wearable Jack Skellington Bowtie - Originally posted to Thingiverse on 2023-Oct-27
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 13
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Halloween, you better make a scene... by wearing a bow-tie worthy of completing your Pumpkin King outfit.
Two options are available: a dual extrusion and a single color. Glue on a couple of safety pins and ribbons to attach it to your royal top.
I've found that the dual color is heavy and tends to be inclined to droop. A painted single color may be light enough to stay upright.
Successfully printed on a Bambu Carbon X1 in PLA.
Creating the Costume Piece
The wings print flat. I used a heat gun to heat it up enough to deform it. You could probably also use a heated build plate, or if you're really careful, a low temperature oven.
On the back I glued three safety pins and two pieces of ribbon (see picture). Unfortunately the two-color extrusion piece is too heavy, so it still droops on the neck and the safety pin placement is awkward. The single color might be light enough to stay upright.
File Options
WeeksB_JSBowTie-TwoColor.3MF - are the build plates as I printed them on the Bambu setup for two color printing. Three separate build plates are required.
WeeksB_JSBowTie-Single.ZIP - Contains three .STLs for printing with a single color (Head, Left Wing, Right Wing)
WeeksB_JSBowTie-MultiColor.ZIP - Contains FOUR folders. The 3MF folder contains three .3MF files, one for each Bambu print file. The other three folders contain the multiple .STLs required for multicolor printing of Head, Left Wing, and Right Wing. In total 16 files are contained within this ZIP