Good Eats Parachuting Chicken
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is the famous chicken from the beloved and my favorite food network show Good Eats starting Alton Brown. It has been in the show since the first season but then had the later seasons had the addition of the parachute. In the later seasons you can find him sitting on the on a box on the kitchen counter.
Print Settings
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
4mm
Infill:
?
Filament:
MatterHacker PLA
White
Notes:
I printed the chicken with 20% infill But after adding the parachute it and the wired to attach the parachute to the chicken it became to top heavy. So I would go heaver on the chicken.
Also you might not need a raft because I was able to print the support material with at 70% overhang angle. But because of that one part of the support material didn't want to stick the bed.You didn't need a raft for the parachute. But to use less support material flip the model upside down.
This is not a full scale model!
The chicken is 81.6517 Z, 104 Y, 76.197 X
The parachute is 86 Z, 115.9274 Y, 116.3979X
Post-Printing
Things need to make this - Some sort of wire to attach the parachute to the chicken.
I painted the chicken and the parachute. Then glued the wire the parachute then the chicken.
I painted the parachute like so.
How I Designed This
I used tinker cad to make this model.
Category: Decor