1 / 8
1.5 inch Plastic Plumbing Fittings — image 1
1 / 8

1.5 inch Plastic Plumbing Fittings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I modeled these using measurements from ABS 1-1/2" plumbing fittings. My goal is to make all of the standard ABS/PVC…

Rating
5 / 5
Likes
54
Downloads
680
Makes
4
Views
2,583
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution

I modeled these using measurements from ABS 1-1/2" plumbing fittings. My goal is to make all of the standard ABS/PVC plumbing fittings, at least in the 1.5" range. These can then be printed very small to test build plumbing installations.

  • 1-1/2" ABS pipe, 3" length
  • 90 degree elbow: 1-1/2"
  • Sanitary tee: 1-1/2"
  • P-trap: 1-1/2"
  • Long sweep 90 degree elbow (2" radius): 1-1/2"
  • 45 degree elbow: 1-1/2"
  • 22.5 degree elbow: 1-1/2"

The included 1.5" pipe is a bit too tight to fit the sockets, it may need to print at 97% for a better fit. Scale it in the Z direction to make any pipe length as needed.

I've printed these off at 40% scale and verified a nice tight fit between pipe and fitting.

** Printed at 23% scale will allow fitting onto 5/16" vinyl tubing.

*** Do not install these for actual plumbing! These are geometrically accurate models but materials and final product are in no way certified for building code. (I didn't think this needed to be said 😅 )

Category: Replacement Parts

Tags