Project Hail Mary - Rocky Action Figure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little figurine/sculpture of Rocky in the movie Project Hail Mary. Model is downloaded from official site.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 269
- Makes
- 1
- Views
- 1,133
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site (https://projecthailmary.com/).
3D Model Print Instructions:
Rocky Action figure/Sculpture
This model includes two file options:
● Supported STL – Pre-supported and ready to print
● Unsupported STL – Ideal if you want to scale the model or create your own custom
supports
The figure can be printed using either a resin or filament (FDM) 3D printer.
At 100% scale, the figure prints at approximately 3 inches tall.
Printing Steps
● Step 1 – Choose Your File Type
○ Option A: Supported STL
■ Supports are already included and optimized for printing
■ No additional edits are required before slicing
○ Option B: Unsupported STL
■ Scale the model to any size you prefer
■ You will need to generate supports before printing
■ Most slicers offer both automatic and manual support options
● Step 2 – Import File
Download and import the STL file into your slicer program (such as Chitubox, Bambu
Studio, or Lychee).
● Step 3 – Prepare the Print
Use your slicer to generate the print layout and settings required for your specific 3D
printer.
● Step 4 – Post-Print
Once printing is complete:
● Carefully remove the supports
● For easier removal, place the model in warm water to soften the supports and
reduce surface damage
Pro Tips:
● Resin prints will capture finer detail than filament prints
● For best results, print at a 0.03–0.05 layer height (resin) or 0.1–0.2 (FDM)
● Always cure resin prints fully after cleaning