SAKURA | Scalable Pencil Holder

SAKURA | Scalable Pencil Holder

Inspired by spring cherry blossoms, SAKURA brings a soft, floral touch to your desk.

100% scalable, print it at any size you need

Go jumbo-size to tame your chaotic desk jungle,
or tiny and adorable for little hands (and even tinier pencils).

My kids love them so much I had to print extra-tiny ones on top of all 3 original prints that they already snatched away ;-D

DIMENSIONS | Ø 120mm x H 90 mm
but scalable!

3D printing settings

The STL file is already oriented properly.
The model is "full", that's totally normal.
You have to "emtpy it" by using one of the methods described below:

I recommend to print it in vase mode (see settings below):

For a 0.8mm nozzle:
• activate "vase mode" (spiral vase or spiralize)
• Layer height: 0.4mm/layer
• Line width: 0.8 to 1.5mm (it works ;-)
• Bottom shell layers: 3

For a 0.4mm nozzle:
• activate "vase mode" (spiral vase or spiralize)
• Layer height: 0.2mm/layer
• Line width: 0.8 to 1mm
• Bottom shell layers: 6

Or you can print in regular mode (not vase mode) with a 0.4mm nozzle and 2 to 4 wall perimeters.
Just make sure to cancel the infill and cancel top layers so you actually end up with a cup.

I also added some fuzzy skin to add some surface texture:
- fuzzy skin point distance: 0.6mm
- fuzzy skin thickness: 0.25mm.

Happy printing!