Secondary USB slot for Peugeot 3008 and Citroen C5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secondary USB slot for Peugeot and Citroen
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slot for mounting a second USB port on the Peugeot 3008, Citroen C5, and other PSA models with the same button layout. It replaces the card holder on the dashboard to the left of the steering wheel. A switch panel in the same format is also available on my profile.
Assembly is very simple: just tilt the USB cable and slide it into the mount until it is fully seated. Then, take the small piece called "cover" and position it as shown in the second image. Secure everything with a zip tie and, optional, it is highly recommended to add some 1 mm thick double-sided tape as shown in the image below: this will prevent any movement of the USB port inside the housing.

This model is only compatible with this type of cable:
https://aliexpress.com/item/1005007211608703.html?
The purpose of this mount is to provide a second, more accessible USB port, as the one in the center console is deeply recessed and difficult to reach. This setup allows me to use an Ottocast Mini equipped with a button to switch between two different phones. If you also want to use this second USB port for Android Auto or Apple Carplay, you will need to swap the original cable with this one in the rear port of the NAC.
Printed in Nylon for a better finish and higher resistance to summer temperatures.