Fuel Petcock Gasket for Honda XR and CRF Bikes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to fix my leaky Honda XR650R petcock. Should replace 16955-HA2-005
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v3.0
Fuel petcock on my XR650R was allowing fuel to come out even when it was off. Took it apart and found the gasket with four holes in it was chewed up. Printed this on a textured sheet in 92A TPU with the following settings and it doesn't leak at all and the lever has good resistance. Installed with the bed side facing out as seen in the picture.
first layer height - 0.2mm
layer height - 0.12mm
0.4mm nozzle
3 perimeters
5 layers top and bottom
15% cubic infill
The low infill allows good squish while the small layer height and number of layers and perimeters allows for a good seal.
A quick google search says this should work on at least the following models:
XR650R (All Years)
CRF250X (04-07)
CRF450X (05-06)
TRX250R (86-89)
Claimed on forums to also work on:
XR400R
XR250R