Case for Raspberry Pi 5 with 4.3inch HDMI LCD (B) 800x480
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.21 – €5.15 net (excluding VAT)
For file: Raspberry Pi With Screen Case_0.4n_0.15mm_PETG_MK4S_4h48m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.68 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 4.8 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I got this screen that is super compact with the Pi and had fun designing a case for it.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I got this screen that is super compact with the Pi and had fun designing a case for it. The idea was to do it with one part so it can easily just slide in and out.
The screen was called the "4.3inch HDMI LCD (B) - 800x480 - IPS - Capacitive touch"
It fits very well on the Raspberry Pi 5 with very compact connectors (see pictures).
I could not find something to just print so decided to try my hand at designing a case. This took 18 versions to get right over a few days and it was a blast to make. It's free to use and do with as you want. Not required by the license, but please share if you do something with it, would love to see it.
The features,
Most useful ports are exposed
Has vents including at the bottom (so the feet are needed
notch at the bottom to easily remove the components
GPIO is still accessible, but might need a "riser" to make them easier to reach