1 / 2
Omnidirectional wardrobe hook - IKEA
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Omnidirectional hook for IKEA wardrobe. Print in place with no support.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for IDEA BRIMNES wardrobe with 2 doors, but probably fits many other models with the same beam.
You will need
6 g of PETG or PLA
Printing
0.2 mm layer height
3 walls
100% infill
Ignore the slicer mesage about floating regions/overhangs
Post-processing
Gently rotate the parts against each other until they move freely
Making the best of it
As any print-in-place design, this one is quite sensitive to the tolerances. Make sure your filament is dry and your printer is fine tuned.