1 / 1
Project Hail Mary Rocky Action Figure - Official Model — image 1

Project Hail Mary Rocky Action Figure - Official Model

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Project Hail Mary Rocky Action Figure

Rating
5 / 5
Likes
42
Downloads
552
Makes
1
Views
2,793
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site (https://projecthailmary.com/). 

3D Model Print Instructions

Rocky Action Figure Instructions

This model includes 2 figure style option:

  • Articulated Action Figure (1 body and 11 limb pieces)

  • Statue (1 static posed figure)

Both model styles include two file options:

  • Supported STL – Pre-supported and ready to print

  • Unsupported STL – Ideal if you want to scale the model or create your own custom supports

The figure can be printed using either a resin or filament (FDM) 3D printer.
At 100% scale, the figure prints at approximately 3 inches tall.

Printing Steps

  • Step 1 – Choose your figure style option - statue or articulated figure

  • Step 2 – Choose your file type

    • Option A: Supported STL

      • Supports are already included and optimized for printing

      • No additional edits are required before slicing

    • Option B: Unsupported STL

      • Scale the model to any size you prefer

      • You will need to generate supports before printing

      • Most slicers offer both automatic and manual support options

  • Step 3 – Import file
    Download and import the STL file into your slicer program (such as Chitubox, Bambu Studio, or Lychee).

  • Step 4 – Prepare the print
    Use your slicer to generate the print layout and settings required for your specific 3D printer.

  • Step 5 – Post-Print
    Once printing is complete:

  • Carefully remove the supports

  • For easier removal, place the model in warm water to soften the supports and reduce surface damage

Pro Tips:

  • For all prints- 

    • Resin prints will capture finer detail than filament prints

    • For best results, print at a 0.03–0.05 layer height (resin) or 0.1–0.2 (FDM)

    • Always clean resin prints in isopropyl alcohol or similar resin cleaning product fully after printing.

    • If printing in resin make sure to cure the figure with UV light based on your resins recommendations.

  • Articulated figure print-

    • For optimal resin printing you will want a resin with a mix of strength and elasticity. A recommended mixture for this figure with moving parts is ½  Resione Th-72 mixed with ½ Tough74.  Resins that don't have enough elasticity may be too brittle for this figure.

    • When assembling the articulated version you may want to heat up the cavities with warm water or a blow dryer for easier assembly.

    • See the labeled diagram below for proper assembly of the articulated figure. 

    • There are 2 options for his left hand that you can choose from.  An open hand (1C)  or closed hand (1B).

Tags