HSW HOPOW Power Strip Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb Storage Wall mount for HOPOW Flat Plug Power Strip!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I ordered a HOPOW Flat Plug Power Strip for my new work area and I wanted it on my Honeycomb Storage Wall. I designed both pieces to be a very tight fit using M3 Nut Honeycomb Storage Wall Inserts and Countersunk M3 screws (I used 12mm.) The power cord side is fixed against the end of the power strip and the other side can float several millimeters either direction to ensure a proper fit in your HSW.
Just insert your screws into the mounts and then thread the HSW inserts in from the back and they should tighten up firmly. Orient the inserts to match your Honeycomb Wall and they should go right in!
I did not need a hex driver or hex key to tighten the inserts against the mounts but I did make sure my 2.0mm Ball-End Hex Driver would reach the screw without issue. If you need a modified version with an access hole just let me know.