Low strain Ikea Lack table filament grommet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you build a 3D printing enclosure using the ikea lack table or any other surface of about 50mm in thickness, you…
- Rating
- 4.75 / 5
- Likes
- 37
- Downloads
- 410
- Makes
- 6
- Views
- 2,556
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
If you build a 3D printing enclosure using the ikea lack table or any other surface of about 50mm in thickness, you will need to feed filament using a grommet. I found the ones already available were narrow tubes and provided no strain relief as the printer's tool moves from side to side.
The narrowest part of the hole is 5mm so it will work with filament up to 3mm in diameter.
This design has a double funnel shape that allows for movement of the print tool as well as changes in spool winding diameter. A 3/4 inch hole (19mm) must be drilled for installation.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2mm or 0.3mm
Infill: 20%
Filament: generic PETG black