Drybox filament spool rollers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Solution to store 4 filament spools in Ikea Samla box.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 1
- Views
- 777
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my approach for dry-box filament storage based on Ikea Samla 65l box for 4 spools. I also needed a 1 meter of 8mm threaded rod and handful of nuts.
Each spool is placed on 4 rollers. Rolls are 3cm width, so it is easy to put a spool in place (and various spool size will fit).
Each roller is made of three elements - 2 halfs and a join. Parts fit tight, no glue is required. Rollers are designed for bearing 608z. The fitting is tight - it is easier to put the bearing in, when the prints is still hot.
Extra support element is used to ensure the rods doesn't bend horizontaly. It also has a hole in the middle for extra vertical supports (but I didn't use it finally).
The best way to assemble the dry box, is to put all elements together fist (outside of the box), and than squize it in (it is a bit hard).