MattMill Student synchronization gear box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Synchronization gearbox for the MattMill Student.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This gearbox connects both millstones to the drive, which increases the reliability/performance of the mill.
Parts:
1 x cover
Material: PLA or PETG
Supports: only needed for the upper corners
Layer height: 0.2 mm
This part is designed to fit this funnel (use V2!):
https://www.thingiverse.com/thing:1895117
2 x gear
Material: Nylon (or ABS - not tested; if you have, please give a feedback).
No supports.
Layer height: 0.2 mm
For instruction on how to print Nylon refer to this:
https://www.matterhackers.com/articles/printing-with-nylon
and specifically for gears:
https://www.youtube.com/watch?v=kBsEg99Ft5Q
The gears are connected to the millstones with M8 bolts.