1 / 3
Soldering Fumes Extractor (Lötrauchabsaugung) — image 1
1 / 3

Soldering Fumes Extractor (Lötrauchabsaugung)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Soldering Fumes Extractor with 120 mm fan and carbon filter

Rating
0 / 5
Likes
17
Downloads
67
Makes
0
Views
1,244
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Soldering Fumes Extractor with 120 mm fan and coal filter. The whole part consists of the main housing and the lid. The lid is available in two flavors: for a metal flip switch with thread diameter of 6 mm or a plastic rocker swith with 20 mm x 13 mm outer housing dimensions. 

Parts printed in recycled PLA, settings see below next to the models.

Please find the entire CAD model (assembly) in the files section, so you can adapt the model to your needs. Please note that I have also modeled the fan and the carbon filter.

 

Bill of materials 

You will need for the whole system besides the printed parts:

  • 12 V DC fan (120 mm x 120 mm x 25 mm )
  • rocker switch (20 mm x 13 mm) or metal flip switch (6 mm through hole diameter in housing)
  • DC jack (8 mm through hole diameter in housing)
  • DC power supply (I used an old one from another discarded device)
  • 2x carbon filters (130 mm x 130 mm x 9 mm)
  • 4x M3 thread heat inserts
  • 4x M3 screws

 

Attributions

Inspired by the following soldering fume extractors which look all really good:

 

Feedback

Feedback? Ideas for improvements? Please leave a comment. 

Tags