Lucario Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Patreon : https://www.patreon.com/cw/Vividprintwork
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This build plate is tuned for strong white filament to prevent blending and achieve clean color separation. A second build plate is included for weaker white filament, but it hasn’t been fully tested—adjustments may still be needed.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.7x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
#eaecf5 PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 4 unique filaments
Build plate one Strong White
Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Blue
At layer #7 (0.64mm) swap to Ice Blue
At layer #13 (1.12mm) swap to Cold White for the rest.
Build plate two Weaker White untested
Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Blue
At layer #6 (0.56mm) swap to Baby Blue
At layer #7 (0.64mm) swap to Opaque White for the rest.
Setting
Layer height: 0.08
Initial Layer height: 0.16
Wall: 2
Sparse infill density: 100%
Sparse infill pattern: Rectilinear
Turn Off Prime Tower