1 / 2
Earplug Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple case to hold ear plugs for reuse
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Design Requirements
Needed a case to hold my earplugs when traveling
FreeCAD Parameters
Earplug Outer Diameter =19mm
Earplug Depth =25mm
Hole Diameter =14mm
Hole Depth =22mm
Wall Thickness =1.5mm
Cap Overlap =15mm
Tolerance =0.15mm
Printing Setup
Printed with PETG using a .4 mm nozzle and no supports.
First Impressions
The cap fit really loose, had to use 3 layers of packing tape to get it to fit nicely, if I were to print it again I would decrease the tolerances so the packing tape wasn't required. The clear PETG I printed it with works well, it's easy to see if the case has plugs in it or not.