IKEA GRUNDTAL Shaver Holder w/ Text (customizable)

(English text: scroll down...)

Ein einfacher Halter für einen Einweg-Nassrasierer.
Der Halter passt an das "GRUNDTAL" Bad-Eckregal von IKEA (s.Fotos).

Anpassbare Version: Benutze den Customizer um die Länge des Halters festzulegen.
Außerdem lässt sich auf dem Halter ein kurzer, einzeiliger Text aufdrucken - oder eingravieren.
Aufgrund der starken Krümmung im unteren Teil, sollte das Modell mit Support gedruckt werden. Auf Cura waren 10% völlig ausreichend

Wenn du einen hergestellt hast, lass es mich über "I Made One" wissen!
Konstruiert in OpenSCAD: viel Spaß beim Remixen!

-- ENGLISH: --

This is a simple shaver holder for an IKEA "GRUNDTAL" bathroom corner shelf. I made this one in OpenSCAD.

See the photos for reference:
This is a customizable version. you can define the length of the holder as well as a short one-liner text. The text can be embossed on the holder or it can be stenciled out. Several different fonts and styles have been pre-defined in the customizer.

Due to the overhang on the lower hanger portion, you might want to print this with support. On Cura 10% support was completely sufficient.

Enjoy, have fun remixing and let me know when you've made one, and what for!

Print instructions

Category: Bathroom Print Settings

Printer Brand: Prusa

Printer: Prusa Clone

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2 mm or even better 0.1 mm

Infill: doesn't matter

Notes:

Due to the overhang on the lower hanger portion, you might want to print this with support.
If you need a version without support, please let me know and I'll upload one.

For a perfect finish, print with a 0.1 mm layer thickness.

If you're like me and you wouldn't notice it anyhow, because your eyes won't open in the morning while using the shower: use 0.2mm layer thickness!
;-)