Morse Code Straight Key Base & Shorting Bar Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple base, shorting bar knob and optional 3.5mm jack.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a key that was missing the shorting bar knob. I could find plenty of the larger key knobs, but no shorting bar knobs, so I designed this one along with the other 2 parts. This is a simple 130x72x6mm base which should fit many morse code keys such as J38 etc. I intentionally did not include holes as they all seem to be different, so you will need to add those or drill them yourself. There is an optional bracket that can be printed and glued on the base if you want a 3.5mm jack. You will also need a 3x6mm screw for the shorting bar knob. To finish it off, I added 4 - 10x2mm self stick feet.