Rubber Feet for Sage Bambino Plus Drip Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubber feet for the The Sage Bambino Plus Espresso machine drip tray.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
For some unknown reason the Sage Bambino Plus Espresso machine seems to be delivered without rubber feet under the drip tray in spite of having a space for the placement of rubber feet.
In a way I can understand why - there are rubber feet under the main part of the brewer. And there is no risk of the machine sliding.
Maybe the manufacturing of the feet was complicated due to the fact that they need to be slightly wedge shaped.
When you flush the steam wand the water sometimes gets in between the drip tray and the brewer. The water stream hits a inner wall that is angled, and effectively directs some of the water at a gap.
And the tiny gap is because of the missing feet under the tray. By lifting the front end of the tray you close the gap.
Since the feet are not needed to stop it from sliding, you do not necessarily need to print them in TPU/FLEX. Any other material (like PLA) should work fine.
Before I 3D printed the feet I tried another solution that does not require 3D printing.
It will also solve the problem with water ending up under the tray. So I include it here as well for those that want to try that instead.
Take a kitchen sponge and cut it to about 10-12 mm thickness. And cut it to the shape of the part of the drip tray where the steam wand flushes. Then cut some crossing slits halfway through. This is an important step. Without the slits the surface will be to firm and the water will bounce right back up and create another kind of mess. The sponge fix works well, but has to be cleaned and eventually replaced at regular intervals.