ZAPPIT Commander Game Console - End of Watch by Stephen King
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: Zappit_Green.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A look-alike model of the handheld game console written about in Stephen Kings' novel End of Watch.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was thinking of this lil gadget from the Bill Hodges/Holly Gibney series of books by Stephen King the other day and thought why not. The Zappit Commander is produced by Zappit Inc. owned by the now bankrupt Sunshine Solutions. The Zappit is described throughout the book and has these details: charge cord/port, gray 5x3 touch screen, power button, and has WiFi. However its also described as both retro and only 5 years old, looks like an e reader and can fit in a pocket. The one used by Brady Hartsfield is bright pink and another used by Barbara Robinson is yellow. This model uses some "fictional license" and is close to what I imagined in my head while reading the story. The "Gameboy" was also mentioned in relation to the Zappit so I used that as inspiration.
What would your Zappit look like?
All pieces fit together clean and easy but it has several very small parts. You will want to be comfortable using superglue and placing/pressing with tweezers. The LED part will probably press fit without glue. See pictures for help with assembly. Only a few small supports are used on the front face of the model.
-
OVERALL SETTINGS
Filament:
Prusament PLA- Galaxy Black, Jet Black, Gravity Gray, Lipstick Red
Jessie PLA - Tree Green, Yellowbird, Bold Blue, White, Gunmetal Gray
Inland PLA - Hibiscus Pink
Printed on MK3S+ (probably prints faster on a newer machine)
Print Bed: Smooth Steel Sheet
Bed Temp: 60c
Nozzle: 0.4mm
Nozzle Temp: 215c
Layers: .020mm (.005in)
Infill: 20% Rectilinear
Perimeters: 3
Solid Layers Top: 3
Solid Layers Bottom: 3
Supports: I use these settings from BOBSTRO on the Prusa Forums and they work well for me, on both PLA and PETG.
Style: Snug
Top Contact Z Distance: 0.25mm
Pattern: Rectilinear
Pattern Spacing: 3mm
Top Interface Layers: 4
Interface Pattern: Rectilinear
Interface Pattern Spacing: 0.2 mm
XY Separation: 75%