Magswitch 150 Right Angle Jig Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this jig holder based on the other design for the Magswitch 90# switch posted on Printables
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a jig-holder for the Magswitch 150 lb devices. You can use it to attach a fence to your tablesaw, bandsaw, drill press, or any other metal table where you need a 90° fence to the table. The fit is very snug for the switch when printed with PETG so if you are going to use PLA you might want to scale the design to adjust for increased shrinkage. I designed the part in FreeCAD so I have the drawing files if you want to alter parts of the design for your own use. To get a secure fence you will need to print two of these.
Don't pay attention to the color change, I ran out of red filament and just fed in some black that I had available.